Hey all, my ranger is giving me more grief, and I want to get it fixed. A while ago, I heard a "whooshing" noise coming from the bellhousing area, when the truck was in neutral and the clutch was not in. The noise eventually got louder, my clutch got more and more heavy, until one day, the clutch pedal no longer worked. My father and I had decided it was the throwout bearing/slave cylinder, so we dropped the transmission, and bought a new bearing/cylinder, reinstalled the transmission with the new part, and the noise was gone altogether. I've been driving the truck, my father borrowed the truck (it's his in the first place) and when I got it back it was whining from the transmission (I'm assuming scored bearings) and about a week and a half later, the "whooshing" noise was back. As I said above, the noise goes away when the clutch is pushed in. What could the problem be? The cylinder/bearing setup I bought was from kragen's, and is unfortunately out of warranty now, and it seems to be failing. What else would cause the symptoms I'm describing, and if it's a tranny I need instead of the slave cylinder, how much would it cost for a new transmission/what could be swapped into the truck?