Have to have wig wag for rescue team, whats the best way to get to the high beam wire to splice it, as in whats the wire color and were to do it at.. also whats the best light to wig wag in back was thinking about the reverse light. any suggestions would be great, allready asked the sheriff's mechanics and they dont know about 04 rangers. Thanks

1. Are you allowed to have such a device(s)?

2. What color restrictions do you have because that will dicate what you can flash in the back if anything.

I can help you, I've done just about every possible warning device known to man on my '03, as well as the former '91, and my '84. But I need to know that this is all legit first. No offense, but this question was asked last week and when I asked if there was a legitimate reason, the person disappeared. Now you are asking and it is your first post so I am just being cautious. I'll send you a PM as well.

if you need help let me know, i've done it on my 99 XLT. But like wise must be legit. No offense but i'd better be safe than sorry.

Yes this is Legit, Work for Cheddar Fire Dept, and also on ACERT (Ancerson County Emergency Rescue Team). There the ones who told me what to buy. Any help would greatly be appreciated I also have a Whalen CPS690ccc stobe kit it came with 4 clear strobes and 2 red grill stobe lights, was told by capt. to put one strobe in each front turn signal the red grill in my grill and the other 2 strobe in back brake lights. any suggestion on that to would be great

I'll send you a PM with info. Let just go check out the wire colors under my hood.

Have you done the air box mod, if so did it work good

No air box mod. I sent you a PM on the lights. Sorry the wig wag one isn't as nitty gritty detailed as I wanted but the PM character limit is so short, I couldn't. Reply or email me with anything you need.

maybe stupid question but whats the best way to get to the headlight wires, as in take out healight compleatly and wires are easly accessible??

Yea, pulling the headlight out is going to be the easiest way to do it. You'll be able to get to the wires really easy that way.

When I added it to my 2000, I didn't remove the light fixture. It was a PITA. But I was able to do it fine. I dont know what flasher you have, but check out galls wiring diagrams http://www.galls.com/techsupport.html#wiring They should have a diagram for the model you have.

Thanks.