of course they dont make a filtercharger system for my 88, 2.9L. i was wondering if anyone had made a custom one and if so how did u do it cause id like a little more power. thanks for the help.

The Tank

Either just take the top part of your stock airbox off and leave it open UNLESS you just wanna take the box off completely. Just buy a KN cone filter (they sell Universal ones that can be bought at a auto parts store) and attach it to the end of the stock black rubber hose. Or you can go to a exhaust shop and have them bend you a pipe that matches the rubber hose..

hey thanks for the help i was thinking about that but i didnt know if the filter would just hook up to that. again thanks for the help.
peace......keep:pimp:

I have the 2.9 in my 90 Bronco II. I would like to put the universal cone on mine. What about the 2 hoses attached to the top of the air box? Do I need them? Thanks

Originally posted by Siccished
Either just take the top part of your stock airbox off and leave it open UNLESS you just wanna take the box off completely. Just buy a KN cone filter (they sell Universal ones that can be bought at a auto parts store) and attach it to the end of the stock black rubber hose. Or you can go to a exhaust shop and have them bend you a pipe that matches the rubber hose..

If I were going to do this I would make some type of box to avoid sucking the hot engine compartment air into the engine and use plastic not metal, again to avoid the heat. Just my opinion.

Originally posted by mcgoo
I have the 2.9 in my 90 Bronco II. I would like to put the universal cone on mine. What about the 2 hoses attached to the top of the air box? Do I need them? Thanks

They control the warm air system during cold starts. You can remove them, just make sure you plug the vacuum source and the intake manifold.