I've got a problem w/my headlights that probably shouldn't be on on this post but I don't know where else to post it. The prob is, my brights work, but my normal headlights do not. I changed the headlight switch and checked the fuses (all O.K.), but that didn't help. I checked w/a test light @ the headlights, and only got a light when I put the brights on. Any help as to where to look next?? Thanx:(

I would test the multifunction function switch, they run through it after the main light switch. Pin 13 & 15 should be a closed curcuit in the low beam position.

had same problem when i chaned mine found out that the one i got was 4 a 4cyl truck and was missing 2 terminals i would pull it out and compare with the old one

I figured it out, I traced it to a connector in the engine compartment that was bad, thanks for the help anyways:)