I already lowered the rear of my 94 by doing the shackle flip. Easy, cost me a grinder wheel, about 2 hours and gave me around 3" or so. My question is this: I have a guy who can make me a set of drop coils for the front. I'm planning to go like 2-3" up front with the stock beams. What degree bushing should I use to fix the camber? Is the 3.5 degree too much?

Chris.

u shud be fine with 3.5 because the bushings are adjustable twist them around until your camber is zero.

i suggest getting new i beams tho. just my.02

You know those bushings are not adjustable. They are made to adjust the camber and caster at the same time. There is a reason they make different degrees that is b/c not everyone needs a 3.5 some may only need a 2.0 or a 2.25. If you run 3.5's to get the camber ad caster at a happy medium you may only end up with say 2.75 of adjustments. Every truck is different. I suggest taking it to an alignment shop, and getting it aligned and let them put the appropriate adjusters in. I know locally it does not cost anymore for them to do it than it does for me to buy them and install them plus the alignment.