C:\truckpics\1.jpg

The red looks nice.

nice... here's a couple of my picts... the rest aren't developped yet!

#2

SWEET!

How'd ya do that? :confused:

The old fine sand, Dupli-color, and clear coat??

I now have red door handles and windshield whippers to go with the interior, and ive about to paint the dash around the speedometer and i wanted to paint the window cranks. Splash, how did u get the knob off on the end???????

yep

That's it... the old sand-it-down-prime-it-and-paint-it trick:p


Originally posted by GoldRanger
SWEET!

How'd ya do that? :confused:

The old fine sand, Dupli-color, and clear coat??

Do you mean the shifter knob?

Take a hair blower, point it to the knob for like 15 min then pull straight up on the knob.

I had to bore out my new shifter cause the hole was to small.. other then that, I haven't had ANY problems!

C Ya

Originally posted by Whül
I now have red door handles and windshield whippers to go with the interior, and ive about to paint the dash around the speedometer and i wanted to paint the window cranks. Splash, how did u get the knob off on the end???????

no not the shifter knob, the little knob on the end of the window crank.

Oh ok... I didn't take it off... I just taped it before painting it!!!

I suggest not painting the crank though... I regret it now... The paint gets scratched easly now cause it's something you use everyday.... It's the 3rd time I re-paint it!

alright then, i prob wont paint it now. R u gonna paint the dash around the speedometer?

Hey Splash, what's that above your radio?

Yes... it's painted now... I just don't have a picture of it!

Originally posted by Whül
alright then, i prob wont paint it now. R u gonna paint the dash around the speedometer?

Whul, this is a little off topic question. Your black ranger there is that a '94 or abouts (noticed the chrome grille flashing which was only on around 94's). Who made that billet grill, and where'd you get it, oh yeah and how hard was it to put on. I've been looking for one that replaces that whole bottom grill piece that doesn't involve cutting etc.

Well.. the middle one (black) is conected to my ignition... Push button start.

The yellow ones are my shaved door buttons to open the driver door and passenger door....
;)


Originally posted by Stick
Hey Splash, what's that above your radio?

Originally posted by Splash
Well.. the middle one (black) is conected to my ignition... Push button start.

The yellow ones are my shaved door buttons to open the driver door and passenger door....
;)




So does that mean you don't need the key to get your truck started. :) Or does it still require the key in the On position? I think I just answered my own question... but that's interesting. I like that.

Originally posted by DevilSun94_4.0L
Whul, this is a little off topic question. Your black ranger there is that a '94 or abouts (noticed the chrome grille flashing which was only on around 94's). Who made that billet grill, and where'd you get it, oh yeah and how hard was it to put on. I've been looking for one that replaces that whole bottom grill piece that doesn't involve cutting etc.

My 97 has that chrome trim on top as well... I belive the xlt models 94-97 have that chrome trim.

Originally posted by DevilSun94_4.0L
Whul, this is a little off topic question. Your black ranger there is that a '94 or abouts (noticed the chrome grille flashing which was only on around 94's). Who made that billet grill, and where'd you get it, oh yeah and how hard was it to put on. I've been looking for one that replaces that whole bottom grill piece that doesn't involve cutting etc.

How do you like that pushbutton start?

I like the push button... I rarely use it though... But it freaks everyone out when they're in the passenger seat and I start the truck by pushing that button.... I still have to put the key in the "ON" position first though!

I was just bord one day so I connected one side of my starter kill relay to the button and the other side of the button to the other side of my relay.. .. bypassing my starter kill... I know I know... but who would think to push that button after breaking in my truck and smashing my ignition ??? Unless one of you guys steal my truck now!!! :eek:

Hey splash is this possible with a stick shift??? If so email me at ehbedard@hotmail.com and give me the good long details on how to do this cause im liking this idea a good bit. Thanx man

And another thing, where did u get that piece that goes over the radio, where the buttons are. Ive been looking for a piece like that.

actualy... I still have to push down the clutch... Just go in the dash and test the the wires until you find the one that is live when the key is in the crank position.... Then run a live 12V wire to a push button, then to this crank wire... That's it

That little piece that goes over the radio came with the stereo kit for my deck... just go to any stereo shop and ask for it.... I paid something like $5 ....

Originally posted by Whül
C:\truckpics\1.jpg

looks nice dude!

Hey Splash where did you get your push button starter and how much was it? I'd like to put one in my truck.

Nice job guys, looks sweet. I'll stick w/ my Carbon Fiber though...

Fonzie is that a carbon fiber kit or did you use that stick on stuff you get at Wal Mart??
Looks great!:)

It came with his Troy Lee addtion Mazda truck.

Yeah, she came decked out buddy, but it is a kit not stick-on!!!

Hey Splash,


Where did you get that sweet spoiler. I have been looking for one for months now. You have the exact one that I want. I think that as spoiler like that on a truck is the coolest.

TRUCK VISIONS (http://TruckVisions.homestead.com/main.html)
CHECK OUT MY TRUCK SITE (CLUB)

MY INTERIOR IS ABOUT ALL THE SAME ECCEPT I ADDED INTERIOR NIGHT LIGHTS, FOR DASH BOARD AND RADIO, BACK GROUND ALSO.. I WANT METAL PEDALS COLOR MAYBE?.. BUT I LIKE WHAT U GUYS DID WITH THE COLOR BY THE RADIO :) NICE.. I'LL MESS WITH MINE TOMORROW TO SEE WHAT I CAN CHANGE ;)

:hug: