I have a 94 4.0l v6 4x4 when push the 4x button nothing happens at all! Ichecked the fuses and connections. Is there something I missed?
Welcome to RPS - your online Ford Ranger resource. Check out the other sections below for other Ranger goodness!
|
Remove these Ads |
This is a discussion on 4x4 not working PLEASE HELP!!! within the Drivetrain Tech forums, part of the Chassis & Suspension Section category; I have a 94 4.0l v6 4x4 when push the 4x button nothing happens at all! Ichecked the fuses and ...
I have a 94 4.0l v6 4x4 when push the 4x button nothing happens at all! Ichecked the fuses and connections. Is there something I missed?
![]() |
What connections did you check, the switch or the motor or both? If you haven't looked underneath yet, check the motor on the transfer case - if it's unplugged I don't know if you'll get anything. Even if it's working right I think you need to be in park with the brake on for 4-low.
Need to change your timing belt on a Lima? (2.0/2.3/2.5) Look <HERE>.
MOMS RACING
MUSTANG ON MUSTANG
------
'12 Escape - daily driver, with the '97 F150 for the heavy haulin'
'00 XLT X-cab 2wd 3.0 stepside - MM#4
'97 XLT reg cab 2wd 4.0 - MM#3
'02 XL reg cab 2wd 3.0 - MM#4 (sold)
'98 XLT X-cab 4wd 4.0 - (sold) MM#2
'09 Sport X-cab 2wd 4.0 - (sold)
'94 XLT X-cab 2wd 3.0 -(sold) it's just a moneymaker!
'04 XLT std cab 2wd 2.3 (sold) w/Edge & Thunderbolt styling mods: The buildup
'96 XLT x-cab 4x4 4.0 (sold)
'86 STX x-cab 4x4 2.9/2.3 twin stick (sold)
'85 std cab 2wd 2.3 prerunner (R.I.P)
thought it was park or neutral? but no matter check the motor connections if you havent then take off the motor and press the button and see if anything happens with the motor, if nothing happens with the motor you got a bad switch or motor if the motor moves and works with button then you have a bigger issue
Bookmarks