Forum: 3.0 Forced Induction

ebay item # 150482749151

Are there any of you forced induction guys running a better than stock radiator? Mine just developed a leak, and will need to be replaced. I just figured I'd upgrade while I was in there if its necessary or helpful.

Hey guys started on the whipple build monday night pulled the box off and changed fuel pump to a walbro 190 pulled intake off, changed injectors to 23# and plugs autolite 103's t stat changed to 180', wiring harnesses extended and routed Scrap a/c compressor (didnt have it to begin with) gutted...

My Build List: 255LPH BBK Fuel Pump 36# Accel Injectors TurboXS Blow Off Valve (for a 08 WRX/STI) Custom BOV Flange for above Garrett Turbo (custom built, compressor map matched for my truck) MagnaFlow High Flow Cat (3") Already Owned:

Just wondering if anyone can give me some input on this. I have wanted to give the little 3L something to brag about, and a fella I work with who is too smart on trucks wants to help and has some ideas how to turbo my truck. His short and sweet was a vgt turbo running off the exhaust after the...

almost ready for whipple install i got the 4.0 airbox and intake tube but i want to put a cone filter on it instead of the restrictive factory box this a good route to go? thinking k&n 4.0 parts off a cai kit

so im getting ready for my whipple install right away i installed my autometer electric fuel press gauge on the the schrader valve port my readings have been consistent between 66-68 psi while driving both cruising and wot idle is rougly 65 psi from full tank to less than 1/8th whipple manual...

I haven't been on this site in a while, but I found this section through Google and, well, it's what I need! I own a 2005 xlt with a 3.0 v6 and an auto, and according to my door tag its a 5r55e trans. An ad came up on dezertrangers.com (I'm a member there), and in my uneducated opinion seems like a...

Made a new tube today, replaced my three peice setup.

Hey looking at buying a whipple s/c for my 01 3.0 i already ordered the underdog pulley set prior to knowing of possible s/c purchase can i run it with the pulleys? or would i need an overdrive for s/c? what about rockers also? rogue 1:7

Heyy guys, i had this video looong time, but never had a chance to show. Basically, i took this video when i went to Angeles Chrest to drive and test my new setup. I cut many minutes from video to make it more interested. TURN YOUR SPEAKERS ON as HIGH as possible to hear my girl. Here is that...

Bought a whipple the other day. I'm pretty pumped to get my hands on it, so I've been searching the boards, and read almost every whipple post since 05. I'm hesitant to put it on my current engine with 180,xxx miles on it, so I'm going to find a motor to swap in. My plan right now, is to build the...

hey guys.. i was origanaly going to put a 3.8 superchaged into my ranger.. but after doing a tune up and fixing some power robbing issues.. i thought to my self.. hmm maybe i should look into doing a t3 turbo on my tuck.. my buddy is a turbo guy always has somthing turboed.. im thinkin i might get...

www.moranav6racing.com has supercharger intakes for the eaton M112 and M90. anyone going to build a kit using one of these anytime soon?

hey guys i have seached and havent found anything definative.. im hearing use a gasket betweent the turbo and "manifold" and im here dont.. and just use wheel grease. from what im hearing dodge doesnt use a gasket.. ford does between the turbo and manifold but not between the manifold and head.....

I am doing a Turbo build and the guy helping me with the build says i should Meth inject instead of an intercooler... is this a good idea? here's a pic of the turbo mounted on my truck. it is a 3.0L (v6). this was takin' with my phone. pic of the turbo...

this is what i need.. http://www.diyautotune.com/catalog/50-mustang-installer-package-p-306.html time to sell some SH!T!! anyone running anything different for a square body 3.0? whats your expeirience with mega squirt? anyone know how to toon these things?

Hey everyone. New here. I'm planning on throwin' a turbo on my 06 Ranger. How far back can I go with the turbo before having to worry about Intercooling? Or how far forward I should say. I'm pretty much only gonna be running 8-10psi.

hey guys well im going to be setting up the turbo on my 91 soon.. im thinkin that if the exhaust set up works out well i might see if my exhuast guy wants to make a few extras and i could get them to the 3.0 ranger guys on here.. im not sure if anyone would be interested.. and i know it all depends...

Well hey everybody! Hopefully by this january I'll have all the parts I need to start the turbo on my truck! For those of you who have done it before I could use some serious advice on my parts list. What I'm really trying to discourage is those unexpecited parts that alyways run you way over...

How much would it cost to turbo my stock 3.0? how about supercharge?

i purchased a core whipple kit, it seems in good order, no play in the shaft and no strange noises when manually turned. it is the upper intake, complete blower and fittings. i'm asking for help to compile/verify my list of needed parts. i already have a 4.0sohc maf and an xcal2 (innovate...

Hey guys! I finally find myself with some free time now that schools started back up. I've been through 4 different full time jobs this summer... Anyways, i was able to pick up a whipple supercharger for (get this) $100, gotta love potheads.. Unfortunately, its ONLY the charger, so from what...

Ok, its starting to get nice out..so I ordered my tune from Boss, I have a brand new set of 23lb injectors and all the hardware I need to install the whipple. The last item I need some help with is the MAF wiring. I got what I believe to be the correct MAF (4.0SOHC), and it has its harness, but...

need info on install, can this be done , and what mods do i have to do, whipple kit is complete . will it clear my hood etc

Heyy guys, thinking to sell my M90 supercharger and get a M62 clutched for my twincharged setup. The supercharger is in perfect working condition and it makes 6-7ps of boost. If i remember correctly, it came out from a 91 T-bird SC. Asking price $150+ shipping Do we have any FOR SALE section...

Is it a whipple thing. My boost gauge has a nipple ran from the back of the whipple plenum and into the back of the gauge by way of a rubber vac line. The gauge sounds like its supercharged. If you kink the hose under the dash the sound is now under the dash. I have used two different gauges...

Well, as you know I've started gathering my turbo parts and I'm getting quite a nice collection going. What I'm wondering right now is whither I should hit up Morana (http://www.moranav6racing.com/category.html?CategoryID=36) before doing my turbo setup. If I did so I would like to grab a set...

Ok i gonna put up some videos in the next few days I gonna drive the truck till i come home for the summer in beg. of may so i know all the bugs are worked out What do i need of you guys to prove that is a worthy setup and can i start to see a show of people who want the kit it will...

Well folks i got my m90 today. Its gotta tight snout, ported, and original epoxy (i believe) coated rotors. Its very smooth as well. Ill try to post up some pictures of it tomorrow!

browsing stuff I wish I could afford...I noticed this..at the very bottom of the page...new product.. anyone recognize which blower hes using? M112 I reckon.. Supercharge Intake combo Application: 3.0L V6 Ford Rangers, Mazda (http://www.moranav6racing.com/category.html?CategoryID=36)

pretty much all the time it will surge at idle. When its cold or when its warmed up. Also since the install it has a hard time starting when its below freezing outside. We have played with the idle rpm with the tuner and with the screw on the throttle body. With no luck. Its like the extra...

Hey guys I am just curious, with a centrifical style supercharger, would adding an intercooler create more boost or be harder on the engine or does it just serve the purpose of cooling off the air as it goes into the intake?

ive decided to do a remote mount turbo come tax time. ive read everything on boss's website and just about every thead up to page 9 and i think i have more questions nw then before. will installing the upgraded fuel pump now hurt anything since it still a preety much stock engine won't...

Putting a whipple on a 99 requires a lot of little modifications here and there to get it to fit. I will try to list them all and how I solved them. 1. Coolant is looped through the intake plenum - do a hot water bypass 2. The whipple has no place for EGR - Remove the entire...

OK, the Whipple pumps a massive amount of air. So has anyone found the effective limits of injector and/ or fuel pump upgrades from the stock pump and the 24 Lb injectors supplied with the sadly departed Whipple kit? Fuel cost be damned, I love the way my truck performs but like most guys, I would...

just received my whipple kit, started to install , on my 98 3.0, started to install injectors and we noticed that they were different, plugs are diff from mine to injector, crossed part #s and found that they are from a 00-01 navigator/mustang/ with a dohc, will they work? need info before going...

Hello guys, it's me again and i have a bad news and good news. A bad news is, my rod starts knocking, after reving my car. A good news is, i am going to rebuild it and i want to put forged parts inside. I know. Morana has a kit 3.3L all made from forged, but it is 2K?!!!! My budget is $1000-1200...

Ok well im trying to figure out where im gonna put this bad boy. Im no where near starting to build it (i dont even have it yet) but trying to get some decent ideas. I was looking in the engine bay and i saw an area next to the transmission where the precat from the passenger side engine bank is...

Ok, so this blower should be here in the next few days. I am hoping to get it in sometime in September. I have to have my knee scoped and I'll be out of work for a week..so that should give me plenty of time to install and tweak it. So far on my list of prep: 1. Remove underdrive crank pulley...

Hey guys, i am looking for MLS head gaskets for my Vulcan, but i can not find anything. Have anyone tried these MLS gaskes before on 3.0?? If yes, where did you get them Thanx.

Been along time since I have been here, outta touch a little. I am putting a JRSC on my 00 Civic Si and I thought about some of you guys. Anyone? Wheres Bill?! Chris

I got a 2000 4x4 3.0 stick..I aint to sure if I should supercharge it being that Im pushin 145,000 on the mileage lol...I just wanna kno if I can supercharge it and what all I will have to buy to go through with it...