Forum: Submit Tech Articles

I just did an install of an Explorer OHC. Along with the OHC, I obtained an electrochromic rearview mirror (auto-darkening) from an Explorer with automatic headlight controls. The system (as I installed it in my truck) works independently of the headlight switch, and automatically turns on the...

Did this awhile back on my 97 2.3L, hope the pics help the next willing. Used two extension swivels (10" & 6") and one 4" extension. I removed the throttle body and other vacuum connections just to make it easier which it did. Worth the time to do, does help things go easier. The pics are of #3...

**Please note that I, nor Rangerpowersports.com are responsible if you happen to tear a hose or funk something up.** Well, I read a few how to threads on here but none of them had pics! I just did it to mine since I just bought her and wasnt too sure what condition the engine was in. Specs:...

Ok, here goes the TDC method. I think this method is the most accurate method and should be used over the other method I covered yesterday. Remembering in the other method we had gathered our tools, found the Cam Sync, removed either the battery or coil wire, removed the wire connection to the...

Hi guys, I hope I'm posting this in the right section. I went to the scrap yard today and saw a nice FX4 on the lot. It got me thinking; how easy would it be to convert my '06 Ranger to auto locks and windows? The guy wanted 450$ for the panels, the actuator and the fob. Would it be a big job?...

This was wrote for one of my escort. almost the same concept. Keep in mind that any trim panels use retainer clips which should be removed using the tool, otherwise buy a pack of them to replace them when the break. You run the risk of breaking the panels etc without the tool of course. ...

this is how i installed my OHC (overhead console) tools need: 7 tap connectors regular phillips and flat head screwdrive wire strippers dremel or drill 18 or 16 gauge wire razor blade of some kind i used a box cutter.

Alright, so I've been seeing talk of people redoing their headliners in suede but not too much actual information on how to do it or what products to use. So here is how to correctly recover your headliner in suede. The headliner comes out very easy, remove all the trim around it and the grab...

The weather is moderating, and it's time for us to get back to playing with our trucks! For those of you who are installing an Explorer Overhead console in your Rangers, most of the steps have been covered quite thoroughly in other threads; however, the outside temperature sensor and display needs...

I saw this in a write up but it was for a Gen. 3 and I thought I'd through this in here for a Gen. 2 because of the grille's being different:thumbsup: With the grille off the truck. Now get some wire mesh from a hardware store (like the stuff for rain gutters) cut it the size of grille...

alright guys I am doing this in hopes of getting my contributer badge and maybe save you guys some money with the 1st and second generation rangers with a dash that's practically garbage because it's cracked. I picked up a 1966 Chevy Chevelle SS steering wheel last year and the GOOD GUYS auto...

There has been lots of discussion about sound deader, but not too much about actually applying it or how much is needed. If you would like to sound deaden your truck, here is how. The first thing you're going to need is the materials themselves. I chose to go with Hushmat brand products...

my Ranger 5.0 was blowing oil out the seals,pcv grometts and oil cap seating surface,and blowing some pass the NEW pcv valve,engine is carburated,lots of miles on it,it's a compression in the crank case problem,,come up with a great idea to keep me driving until I have the time & money & place for...

i just got a 1999 ford ranger and i am looking to bag it . what is a good bag kit to get ???

*I know we have a write up, but with the tech section down I made another one* Tired of your stock looking Ford Oval? Want something different this How to will show you how to change the color of your hard Plastic Ford Ovals. How to tell witch ones you have, if you can get a fingernail between...

Grabbed a 2-speed Taurus fan from the local junkyard for $15, out the door. First thing i did was all the wiring in the truck, this is the schematic that i used to do so. What i wanted was the high speed to come on when my a/c was turned off. To do that, however, easiest way i found, was to add...

One of the things that I wanted to do to my brand new 2009 ranger was remove these seats. I am still not sure what I am going to do in the space, but here is the directions for removing the seats. The removal took about 1/2 hour per side, give or take. If you have access to air tools, it may be...

I just recently got the Recon White Lightning LED light bar with Brake/turn/reverse lights and got it installed. I had a lot of questions before I got it, and now that I have it all figured out, I though I'd share it all in one place. It is a simple install, but the main reason I wanted to share...

Installing HID's in mustang fog lights is not a plug and play project, you will have to modify the case to fit the bulb. it took about an hour total (with wiring up the ballasts and all. i did not include wiring the fog lights or the balasts in this because they are a straight forward task. ...

Looking to upgrade the rear brakes from drum to disc? It's really not to bad. I bought a 95 Mustang rear end for $75.00 and swapped the parts. I had to modify the backing plate mounts to fit for space reasons. The Mustang has a 3/4 inch more of spacing, so you have to change the plates to make the...

This is a mod that was born through bordem and extra lights around. So there may be a better method, or different method to go about doing it. It involves taking a standard 100w H3 bulb into the stock reverse light socket. First step is to remove the reverse light socket from the tail lamp...

This is a how to on how to do the Blinker Mod on the 2nd generation rangers. I have tested this on my Ranger and it works for me im not going to guarantee it works on all 2nd Generations but i know it worked on mine. Tools and Parts needed: Wire Taps (or Crimp Connectors your choice) Some...

The purpose of the write-up is in no way to take credit for a current and previous mod, but rather to better detail how to do it. In my searchings I have found three different ranger sites (RPS, R-F, and generation-edge) that explain and slightly show to do to the blinker mod. But it was the...

hey guys i figured i finally write this how to up.. I preformed this on emgriggs 2006 4.0 ranger with an AEM intake system. I know that this defiantly works on 4.0 engines but i am sure that the 2.3 and 3.0 engines can have the same thing done to them as they also have the mass air and air box...

I have had several of you ask me if my taillights are night shaded. Actually, they are not. A year or two ago I decided that I wanted to tint my tails but since the cops around here can be...well cops, I figured they would write me a ticket for them. So I decided to try something new. Instead...

A lot of people on here have a lot of extra electric accessories added to their trucks. Things like auxiliary lighting, stereo amplifiers, air compressors, etc are all items that take a lot of power to use. After finding myself needing more power I decided to upgrade my electrical system on the...

As many of you know tailgates are pretty commonly stolen, and cost a lot to replace. And the fact that our truck lacks a factory lock also means that if you have a topper or bed cover chances are you can still open the tailgate. There are other solutions on the market that consist of a manual lock,...

Well, nobody has done a how to in awhile and i've never done one so here is my first stab at it, enjoy. I started out with the M3 style APC mirrors that everyone and there brother has. I know this can be done with the SS style mirrors, and I'm pretty sure that it could be done with most factory...

How To Resurface a Flywheel I need to replace the clutch, and I want a “new” clutch surface on my flywheel so the clutch will operate problem free. The first step is to have the flywheel cleaned of oil , grease and grime. This flywheel is in decent shape minimal warp and few hot spots

How to lighten a stock cast iron flywheel Start with your stock flywheel, In my case, 2.3L Turbo Ford Its weighs in at 20.5Lbs

How to repair a Kirban Adjustable Fuel Pressure Regulator I had issues with mine pouring fuel from the vacuum line into the intake, ripped diaphragm. The first thing is to find a replacement diaphragm. I did at http://www.kirbanperformance.com/ This was the only place that had them after...

How to final wash an Engine Block You just picked up your block from the machine shop, and your ready to build your engine. The block may look clean, but it is not. It still has grim and grit from machining in it. It is up to you as the builder to final wash the block. First gather...

01-09 ford ranger headlights tools needed - 2 flat head screwdrivers - 1 roll of painters tape - 1 can of any color spray paint(ie same color as the truck) - 1 tube of clear rtv sealant - razor blade - your oven! step 1.)remove headlights

http://www.ford-trucks.com/article/idx/9/277/article/Adding_Manual_Control_to_your_19982000_Ford_Ranger_Pulse_Vacuum_Hubs.html ...

Here is how to install a loaded 10" Probox SuperBass enclosure. I see a lot of people who just take loaded prefabbed enclosures and throw them on the floor and are done with it, they usually don't sit flat on the floor because of the center hump and it just looks horrible. What I am going to...

well i still had the old air pipes from my 88 f150. found that the piece that went into the air filter box,on the 88, e8te 9n679 cb, well the round ends fits the fog lite opening,on my 06, and the other end,is directed towards the air box.no its not connected,but at the air is getting there better....

Here is how to tint your headlights the right way. First step was going to Rvinyl and ordering their headlight tint kit. For this installation I used "light smoke" film since I wanted a subtle look, but they also offer a "dark smoke", a blue, yellow, and a clear protection film. All come in the...

My 4x4 doesnt always engage until its warmed up. Since im in MN this is a problem. I found this on another site and was wondering if anyone has done it. http://www.therangerstation.com/Magazine/Apr04/offroad.htm

I started out with a tired tool box and 3 cans of bed liner spray From there drill out the rivets on the handles. So you dont have to tape around them. Next get your self a scotch brite pad and scuff the hole box down. Most boxes have a clear coat so they dont lose there shine. Then wash the tool...

Here is the install of EBC USR rotors and EBC Yellowstuff pads onto my 2002 2wd Ranger Edge. First jack the truck up and place it on a jackstand. Then remove the wheel. Next go ahead and unbolt the caliper from the bracket, then make a little hanger to hold it out of the way. Do not...

I MANAGED TO GET MY HANDS ON THE FACTORY WORKSHOP MANUAL FOR Ford RANGER/Mazda Bseries pick-ups both 4 cylinder 2.3 and 2.5 and both V6 3.0 and 4.0. if anyone needs some info let me know i'd be happy to scan some info and post it..... obdII codes to when the best rpm to shift is just all kinds of...

First off everyone I'm no expert. I just kept seeing a lot of people asking about this, and I had to replace mine so I figured why not take a few pics and help some people out. So here goes; First off gather the tools needed. All I needed was: 1) 5.5mm socket for the 2 bolts on the Camshaft...

How's it going guys. Here are some completed DIYs that you guys might find helpful. The repair info isn't model specific but does give you a general idea of how certain parts work. Let me know if you guys see any errors. - Anti Lock Brake Safety Information (ABS)...

I figured I'd go ahead and make up a lil how-to on this everyones always seeming to ask questions or wanna know what it looks like. If anyone wants further info or I forget to include something let me know. Tools Required -Phillips Screwdriver -Painters Tape -Cotton Pads(could use towel or...

just did this n my truck so ill take a stab at a writeup. should cost you 80-100 dollars. i spend 120 but i bought a set or torx head bits also. this writeup is for a 93 2.3 liter engine but should be similar for the 2.0, 2.3, 2.5, 2.8, 2.9, 3.0, and 4.0. 1st - you will need to block the rear...

I'm not sure if this section of the forum was working when I posted this How-To in the General Chassis and Brake section, but I think this is a more appropriate section for it. I'm referring to this thread: http://www.rangerpowersports.com/forum/showthread.php?t=246015 If a mod could move it...

http://www.youtube.com/watch?v=c9tKpdCrgXY

HI!... O.k some of you know I was trying to do the "FOG LIGHT" mod on my 2007 RANGER but all the instructions I could find to do this mod were not accurate due to Ford redesigned the electrical system in my year truck. Other years were also effected by this change. If you don't know what the...

Most of them are done on an explorer but its almost exactly the same as a ranger. Enjoy! Please subcribe, comment, and rate! Sea foam - http://www.youtube.com/watch?v=SRfVcvcMycc Air Filter Change - http://www.youtube.com/watch?v=1UWhw0qruNg Intake and Throttle body cleaning -...