Gimme ur ideas!

*princesskyle* · Nov 06 2009, 02:56pm

What engine mods should I do this winter?

stmitch · Nov 06 2009, 05:52pm

If you drive your truck a lot, then I vote intake, exhaust. You'll notice a change for the better with your kpg, and a bit of a power increase to boot. If it's just a show truck, then I say show and shine or turbo to impress people.

*dross93ranger* · Nov 06 2009, 06:08pm

All of the above, I just like the sound of a blowoff valve lol.

*rangersplash2.3* · Nov 06 2009, 06:43pm

turbo

*Wheat* · Nov 06 2009, 06:48pm

Quote:

Posted by dross93ranger

All of the above, I just like the sound of a blowoff valve lol.

Yep, I run a "RFL" Blow off Valve with my Charger.

Froggmann · Nov 06 2009, 10:15pm

Hairdryer.

Flying Horseradish · Nov 06 2009, 10:19pm

Turbo and intake and exhaust haha. Might as well go big right??

*princesskyle* · Nov 07 2009, 12:01am

Haha, Yess im in a two sigs now, That I know of!

Im think turbo... looking good thats for sure.

SHOBout · Nov 07 2009, 01:21am

If you go turbo I can't wait to see the results!

Sean

*princesskyle* · Nov 08 2009, 01:32pm

well im looking into it pretty solidly right now.... I LOVE the remote turbo setups... Ide love to put it in the bed (since im going to be laying out... i figure its a good place..)

Ide also LOVE to build my own headers and stuff...

disturbededge04 · Nov 08 2009, 06:01pm

I think by the time you drop all that coin into fabbing a turbo system and getting it to run properly the gains would not be worth what you have put into it.

I say go 4.0 SOHC or 5.0 but since you plan on bagging it a 2.3 turbo might be the answer for power and clearance in the engine bay. That and if you are bagging and planning a rear mount setup with a 3.0 you would have issues.

Not hating on the 3.0 but I have done a lot with mine other than forced induction. Even with a 80 shot of nitrous and tuned with bolt-ons it wasn't much stronger than a stock 4.0 SOHC. The turbo 3.0 would be different though.

Just my opinion.

*princesskyle* · Nov 08 2009, 06:19pm

yeah I have no intention of making power... I seriously dont care if this truck goes slower once the turbo is on it... I know your all going to say that makes no sense. But I just like the idea of the turbo... I seriously only wanna run like... 8 lbs.... Nothing crazy, If I wanna go fast, if I wanna race and make crazy fast speeds, Ill start tuning my skyline up a bit....... I love the sound of a blow off, I love the sound of the turbo inhale... I want it on the truck, regardless of power gains and what not..

disturbededge04 · Nov 08 2009, 06:22pm

Cool. I got ya. Didn't know what your overall plans were on power. Good luck with it. It will be different.

*princesskyle* · Nov 08 2009, 07:17pm

Thanks, dont know for sure if im gunna even do it. But why not right?

View Poll Results: What Engine mods??
Intake (header, exhaust)	1	10.00%
Turbo??	7	70.00%
Show and Shine accents	1	10.00%
tell me in comment!	1	10.00%
Voters: 10. You may not vote on this poll

Nov 06 2009, 02:56pm	#1
princesskyle .::. Pssht .::. Join Date: Apr 2006 Location: Mississauga, Ontario, Canada Posts: 968 Friends: (9)	Gimme ur ideas! What engine mods should I do this winter? __________________ 07' STX Bagged (soon to be with a six link ) KMC Rock stars, 8.5" with Nitto 555 215/35/20's Up Front 10" with Nitto 555 245/35/20's Out Back Clear Corners Dark Smoked Tails Alpine IDAX100 running Two kenwood 1000WRMS amps on 4 TREO 10"s AVS Knuckle Switch Box Slam Specialties RE7's

Nov 06 2009, 05:52pm	#2
stmitch Is that factory? Join Date: Jun 2006 Location: Indy Posts: 277 Friends: (1)	If you drive your truck a lot, then I vote intake, exhaust. You'll notice a change for the better with your kpg, and a bit of a power increase to boot. If it's just a show truck, then I say show and shine or turbo to impress people. __________________ 2000 ranger 3.0 FFV Oxford white regular cab looks: 03 cobra hood, Keystone bumper cover w/foglights, color matched grille,SS mirrors, Projector headlights, clear corners, white face gauges/ac panel, roush aluminum dash, 17x8 mach 1's suspension: djm 2/3, Roush front/rear swaybars performance: Gibson stainless exhaust, MAC Cold Air, 04 ranger 2.3L electric fan, underdog 4 piece pulley set Waiting to be installed: rollpan, headers

Nov 06 2009, 06:43pm	#4
rangersplash2.3 The Real Splash Join Date: Jul 2007 Location: novi, mi Posts: 5,239 Friends: (40)	turbo __________________ mods: 18x9 inch chrome mustang bullitts, 245\40\18 nexen tires, hurst shifter, painted 4x4 valance with fogs, pioneer DEH-p9600-p flip down, soft bed cover, flowmaster delta 40, 01-03 cobra, leather\seude buckets, C.A.I., cone filter, vent visors, niteshaded tails & corners, repainted, 8000k HIDs. future mods to come: roll pan(ready), new tweeters, projector headlight\corners, 20%window tint, 3\4 drop, racer walsh cam, turbo, new windshield, new paint, new 20x9 chrome bullitt rims.

Nov 06 2009, 10:15pm	#6
Froggmann Tabasco Sauce on da Nuts Join Date: May 2008 Location: Goldendale, WA Posts: 195 Friends: (0)	Hairdryer. __________________ 1999 Ranger XLT Extended Cab 4x4. 3.0FFV--5spd. 3.73's and 30x9.5 rubber on all 4 corners. Underdog U/D Crank Pulley 180* T-Stat Half-Shafted/90 degree mod and Ported TB AirBox Mod and Hot Water Bypass Mod Hopefully Coming Soon: Electric Fan Composite Upper Tinted Front Windows


Home Forum TOTM Tech Classifieds Social Groups Mods Directory

Nov 07 2009, 12:01am	#8
princesskyle .::. Pssht .::. Join Date: Apr 2006 Location: Mississauga, Ontario, Canada Posts: 968 Friends: (9)	Haha, Yess im in a two sigs now, That I know of! Im think turbo... looking good thats for sure. __________________ 07' STX Bagged (soon to be with a six link ) KMC Rock stars, 8.5" with Nitto 555 215/35/20's Up Front 10" with Nitto 555 245/35/20's Out Back Clear Corners Dark Smoked Tails Alpine IDAX100 running Two kenwood 1000WRMS amps on 4 TREO 10"s AVS Knuckle Switch Box Slam Specialties RE7's

Nov 07 2009, 01:21am	#9
SHOBout Slow Vulcan Join Date: Feb 2008 Location: Canada Posts: 423 Friends: (2)	If you go turbo I can't wait to see the results! Sean __________________ 1999 Ford Ranger 4x4 5-Speed Hurst shifter Now sporting some Soft 8's Pioneer DEH-P4000UB Pioneer 10" Shallow mount behind the seats Pioneer 6.5s up front and some 6x8s out back 1989 Ford Taurus SHO 5-Speed 17" Konig Wheels, Yokohama ES100's 13" "SHO" dual piston caliper brakes, SS brake lines Tokicos and Eibachs, Front and Rear Strut braces SS "y" pipe, Dynomax exhaust

Nov 08 2009, 01:32pm	#10
princesskyle .::. Pssht .::. Join Date: Apr 2006 Location: Mississauga, Ontario, Canada Posts: 968 Friends: (9)	well im looking into it pretty solidly right now.... I LOVE the remote turbo setups... Ide love to put it in the bed (since im going to be laying out... i figure its a good place..) Ide also LOVE to build my own headers and stuff... __________________ 07' STX Bagged (soon to be with a six link ) KMC Rock stars, 8.5" with Nitto 555 215/35/20's Up Front 10" with Nitto 555 245/35/20's Out Back Clear Corners Dark Smoked Tails Alpine IDAX100 running Two kenwood 1000WRMS amps on 4 TREO 10"s AVS Knuckle Switch Box Slam Specialties RE7's

Nov 08 2009, 06:01pm	#11
disturbededge04 Ready for a rebuild. Join Date: Jan 2006 Location: BFE, SC Posts: 2,685 Friends: (16)	I think by the time you drop all that coin into fabbing a turbo system and getting it to run properly the gains would not be worth what you have put into it. I say go 4.0 SOHC or 5.0 but since you plan on bagging it a 2.3 turbo might be the answer for power and clearance in the engine bay. That and if you are bagging and planning a rear mount setup with a 3.0 you would have issues. Not hating on the 3.0 but I have done a lot with mine other than forced induction. Even with a 80 shot of nitrous and tuned with bolt-ons it wasn't much stronger than a stock 4.0 SOHC. The turbo 3.0 would be different though. Just my opinion. __________________ www.rogueperformance.com Mods listed on Profile page.

Nov 08 2009, 06:19pm	#12
princesskyle .::. Pssht .::. Join Date: Apr 2006 Location: Mississauga, Ontario, Canada Posts: 968 Friends: (9)	yeah I have no intention of making power... I seriously dont care if this truck goes slower once the turbo is on it... I know your all going to say that makes no sense. But I just like the idea of the turbo... I seriously only wanna run like... 8 lbs.... Nothing crazy, If I wanna go fast, if I wanna race and make crazy fast speeds, Ill start tuning my skyline up a bit....... I love the sound of a blow off, I love the sound of the turbo inhale... I want it on the truck, regardless of power gains and what not.. __________________ 07' STX Bagged (soon to be with a six link ) KMC Rock stars, 8.5" with Nitto 555 215/35/20's Up Front 10" with Nitto 555 245/35/20's Out Back Clear Corners Dark Smoked Tails Alpine IDAX100 running Two kenwood 1000WRMS amps on 4 TREO 10"s AVS Knuckle Switch Box Slam Specialties RE7's

Nov 08 2009, 06:22pm	#13
disturbededge04 Ready for a rebuild. Join Date: Jan 2006 Location: BFE, SC Posts: 2,685 Friends: (16)	Cool. I got ya. Didn't know what your overall plans were on power. Good luck with it. It will be different. __________________ www.rogueperformance.com Mods listed on Profile page.

Nov 08 2009, 07:17pm	#14
princesskyle .::. Pssht .::. Join Date: Apr 2006 Location: Mississauga, Ontario, Canada Posts: 968 Friends: (9)	Thanks, dont know for sure if im gunna even do it. But why not right? __________________ 07' STX Bagged (soon to be with a six link ) KMC Rock stars, 8.5" with Nitto 555 215/35/20's Up Front 10" with Nitto 555 245/35/20's Out Back Clear Corners Dark Smoked Tails Alpine IDAX100 running Two kenwood 1000WRMS amps on 4 TREO 10"s AVS Knuckle Switch Box Slam Specialties RE7's